HomeStore

Water Methanol Injection Pump (30 GPH/1890CC Per Minute @ 190 psi)

Water Methanol Injection Pump (30 GPH/1890CC Per Minute @ 190 psi)

  • In Stock 

Features Include:

  • Pressure adjustable from 100-300 PSI
  • 3/8 NPT female inlet & outlet port
  • Motor turns 1750 RPM @ 12 volts
  • 13.5 amperage draw
  • Built-in bypass valve
  • Built-in thermal protection
  • Built-in anti reverse check valve
  • Built-in heat sinkon back of motor
  • Heavy duty dual EPDM pump seals
  • Pressure adjustable from 100-300 PSI
  • Can run dry up to 1 hour without damage
  • 100% methanol compatible
  • Tested prior to shipping
  • Made in the USA
  • Weight 5.2 lbs

Flow & Horsepower Ratings @ 13.5 Volts:

  • 1.4 gallons per minute open flow
  • 115 liters per hour @ 190 PSI
  • 30 gallons per hour@ 190 PSI
  • 1890 cubic centimeters @ 190 PSI
  • Supports up to 1700-2200 horsepower - 100% water mix
  • Supports up to 1000-1300 horsepower -50/50 water methanol mix
  • Supports up to 800-1100 horsepower - 100% methanol mix

Special Notes:

  • Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
  • Use 12 gauge wire for power and ground
  • Does not include pump fittings. Pump fittings are available for sale separately
  • Pumps come preset at 220 PSI
  • Expect 4-5 years of service if pump pressure is left at 220 PSI or below
  • Running the pump over 250 PSI is not advised and will shorten pumps life
  • All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
  • Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
  • Pump may be mounted vertical or horizontal

Contents Include:

  • Pump (1)

Special Notes:

  • Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
  • Does not include pump fittings. Pump fittings are available for sale separately
  • Pumps come preset at 220 PSI
  • Expect 4-5 years of service if pump pressure is left at 220 PSI or below
  • Running the pump over 250 PSI is not advised and will shorten pumps life
  • All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
  • Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
  • Pump may be mounted vertical or horizontal


Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSI Can run dry up to 1 hour without damage 100% methanol compatible Tested prior to shipping Made in the USA Weight 5.2 lbs Flow & Horsepower Ratings @ 13.5 Volts: 1.4 gallons per minute open flow 115 liters per hour @ 190 PSI 30 gallons per hour@ 190 PSI 1890 cubic centimeters @ 190 PSI Supports up to 1700-2200 horsepower - 100% water mix Supports up to 1000-1300 horsepower -50/50 water methanol mix Supports up to 800-1100 horsepower - 100% methanol mix Special Notes: Do not use

$64.74

Original: $184.96

-65%
Water Methanol Injection Pump (30 GPH/1890CC Per Minute @ 190 psi)—

$184.96

$64.74
Product image 1
Product image 2

Description

  • In Stock 

Features Include:

  • Pressure adjustable from 100-300 PSI
  • 3/8 NPT female inlet & outlet port
  • Motor turns 1750 RPM @ 12 volts
  • 13.5 amperage draw
  • Built-in bypass valve
  • Built-in thermal protection
  • Built-in anti reverse check valve
  • Built-in heat sinkon back of motor
  • Heavy duty dual EPDM pump seals
  • Pressure adjustable from 100-300 PSI
  • Can run dry up to 1 hour without damage
  • 100% methanol compatible
  • Tested prior to shipping
  • Made in the USA
  • Weight 5.2 lbs

Flow & Horsepower Ratings @ 13.5 Volts:

  • 1.4 gallons per minute open flow
  • 115 liters per hour @ 190 PSI
  • 30 gallons per hour@ 190 PSI
  • 1890 cubic centimeters @ 190 PSI
  • Supports up to 1700-2200 horsepower - 100% water mix
  • Supports up to 1000-1300 horsepower -50/50 water methanol mix
  • Supports up to 800-1100 horsepower - 100% methanol mix

Special Notes:

  • Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
  • Use 12 gauge wire for power and ground
  • Does not include pump fittings. Pump fittings are available for sale separately
  • Pumps come preset at 220 PSI
  • Expect 4-5 years of service if pump pressure is left at 220 PSI or below
  • Running the pump over 250 PSI is not advised and will shorten pumps life
  • All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
  • Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
  • Pump may be mounted vertical or horizontal

Contents Include:

  • Pump (1)

Special Notes:

  • Do not use with petroleum products (E85, E98, gasoline, diesel, etc)
  • Does not include pump fittings. Pump fittings are available for sale separately
  • Pumps come preset at 220 PSI
  • Expect 4-5 years of service if pump pressure is left at 220 PSI or below
  • Running the pump over 250 PSI is not advised and will shorten pumps life
  • All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump
  • Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output
  • Pump may be mounted vertical or horizontal


Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSI Can run dry up to 1 hour without damage 100% methanol compatible Tested prior to shipping Made in the USA Weight 5.2 lbs Flow & Horsepower Ratings @ 13.5 Volts: 1.4 gallons per minute open flow 115 liters per hour @ 190 PSI 30 gallons per hour@ 190 PSI 1890 cubic centimeters @ 190 PSI Supports up to 1700-2200 horsepower - 100% water mix Supports up to 1000-1300 horsepower -50/50 water methanol mix Supports up to 800-1100 horsepower - 100% methanol mix Special Notes: Do not use

You may also like

-65%NEW
Thumbnail 1

1' Stainless Steel Braided Lines for WMI

$19.06

$6.67

-65%NEW
Thumbnail 1

4 Port Distribution Block

$26.12

$9.14

-65%NEW
Thumbnail 1

4AN "T" Fitting

$7.77

$2.72

-65%NEW
Thumbnail 1

Hi-Flow Pump Supply Upgrade

$67.77

$23.72

-65%NEW
Thumbnail 1

Water-Methanol Quad Nozzle Upgrade Stainless Steel Braided Line

$88.24

$30.88

-65%NEW
Thumbnail 1

15' Stainless Braided Line (4AN)

$90.36

$31.63

-65%NEW
Thumbnail 1Thumbnail 2

Pulse Series Solenoid

$103.07

$36.07

-65%NEW
Thumbnail 1Thumbnail 2

Four Port Inline Distribution Block

$20.47

$7.16

-65%NEW
Thumbnail 1Thumbnail 2

Water Methanol Injection Pump (20 GPH/1260CC Per Minute @ 190 psi)

$164.49

$57.57

-65%NEW
Thumbnail 1Thumbnail 2

Water Methanol Injection Pump (50 GPH/3150CC Per Minute @ 190 psi)

$205.43

$71.90

-65%NEW
Thumbnail 1Thumbnail 2

Universal 4.2 Gallon Floor Mount Tank (With low level sensor)

$236.50

$82.77